|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DC/DC Converters TEN 6 Series, 6 Watt UL 60950 Features Ultra wide 4:1 Input Range Full SMD-Design High Efficiency up to 84% Extended Operating Temperature Range -40C to +85C Indefinite Short-circuit Protection Reverse Voltage Protection I/O-isolation 1'500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Baseplate Shielded Metal Case with insulated 24-pin DIP with Industry Standard Pinout 3 Year Product Warranty The TEN 6 series DC/DC converter is designed for applications requiring very wide operating voltage range. Typical applications are tele- and data communication systems, mobile battery powered equipment and industrial process control systems operation from different input voltages i.e. 12/24 VDC or 24/48 VDC battery voltages. High efficiency allows operating temperatures up to 85C. Input filtering to EN 55022, class A and low output ripple minimise design-in time and cost. Models Ordercode TEN 6-2410 TEN 6-2411 TEN 6-2412 TEN 6-2413 TEN 6-2421 TEN 6-2422 TEN 6-2423 TEN 6-4810 TEN 6-4811 TEN 6-4812 TEN 6-4813 TEN 6-4821 TEN 6-4822 TEN 6-4823 18 - 75 VDC 9 - 36 VDC Input voltage range Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 1200 mA 1000 mA 500 mA 400 mA 500 mA 250 mA 200 mA 1200 mA 1000 mA 500 mA 400 mA 500 mA 250 mA 200 mA Efficiency typ. 78 % 81 % 84 % 84 % 81 % 84 % 84 % 78 % 81 % 84 % 84 % 81 % 84 % 84 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEN 6 Series Input Specifications Input current no load /full load 24 Vin models 22 mA 20 mA 48 Vin models 11 mA 10 mA / 600 mA typ. (at 12 VDC Vin) / 300 mA typ. (at 24 VDC Vin) / 300 mA typ. (at 24 VDC Vin) / 150 mA typ. (at 48 VDC Vin) 6 Watt Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection Conducted noise (input) 24 Vin models 8.5 VDC / 8.0 VDC typ. 48 Vin models 17 VDC / 16 VDC typ. 24 Vin models 50 V max. 48 Vin models 100 V max. 1.0 A max. EN 55022 level A, FCC part 15, level A 1% - - - - - Input variation Vin min. to Vin max. Load variation 10 - 100 % single output models dual output models balanced load dual output models unbalanced load 0.3 % max. 1.0 % max. 1.0 % max. 3.0 % max. 75 mVpk-pk max 0.02 % / K > 110% of Iout max., constant current indefinite (automatic recovery) - single output models - dual output models - Operating - Case temperature - Storage 3'000 F max. 680 F max. - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C 3.5% /K above 70C 95 % rel H max. >1 Mio. h @ + 25 C 1'500 VDC 380 pF typ > 1`000 M Ohm 300 kHz typ. (Pulse frequency modulation PFM) UL/cUL 60950 , IEC 60950, EN 60950 Compliance up to 60 VDC input voltage (SELV limit) CSA (File no. 226037) Input/Output Input/Output Input/Output (500 VDC) Output Specifications Voltage set accuracy Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Current limitation Short circuit protection Capacitive load General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation voltage Isolation capacity Isolation resistance Switching frequency Safety standards Safety approval All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 6 Series Physical Specifications Case material Baseplate material Potting material Weight Soldering temperature Steel, Nickel plated non conductive FR4 Silicon TSE 3331 (UL 94V-0 rated) 14 g (0.49 oz) max. 260 C / 10 sec. 6 Watt Outline Dimensions mm (inches) (0.18 0.02) 0.5 2.54 (0.1) 4.5 32 0.5 (1.25 0.02) 5.08 15.24 (0.6) 22.86 (0.9) Bottom view 23 22 2 3 Pin-Out Pin 2 3 9 11 14 16 22 23 Single -Vin (GND) -Vin (GND) No pin No function +Vout -Vout +Vin (Vcc) +Vin (Vcc) Dual -Vin (GND) -Vin (GND) Common -Vout +Vout Common +Vin (Vcc) +Vin (Vcc) (0.2) 16 14 0.5 2.4 0.5 (0.09 0.02) 9 11 Insulated Baseplate 15.24 (0.6) 20 0.5 (0.8 0.02) (0.02) 3.8 10 0.5 (0.15) (0.4 0.02) Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Specifications can be changed without notice Rev. 05/05 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43311 4511 * Fax +41 43311 4545 * info@traco.ch * www.tracopower.com Page 3 of 3 |
Price & Availability of TEN6-4823 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |